Anderson Metals lead free brass flare tee provides a reliable three-way connection for 5/16" copper, brass, aluminum, or steel tubing. The 45-degree flare design creates a tight, leak-free seal that can be disassembled and reassembled without affecting seal integrity. Meets lead-free requirements of Public Law 111-380.

• 5/16" flare x flare x flare three-way tee
• Lead free brass - meets Public Law 111-380 and NSF/ANSI 372
• For use with copper, brass, aluminum, or steel tubing
• Rated -65 to +250 deg F
• Can be disassembled and reassembled without affecting seal
• Resists mechanical pullout
• Flag tagged for retail display, bulk packed

Commonly used in HVAC, refrigeration, fuel lines, and plumbing branch connections where reliable joints to flared tubing are required.

Tip: A clean 45-degree flare on each tube end is essential for a leak-free joint. Use a flaring tool sized for the tubing OD, lubricate the flare cone with a drop of refrigeration oil, and tighten the flare nuts hand-tight plus one to one-and-a-half turns with a flare wrench. Overtightening cracks the flare and causes leaks.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: This product can expose you to lead a chemical known to the State of California to cause cancer and reproductive harm. www.P65Warnings.ca.gov