Turn a 3/4" polyethylene pipe run 90 degrees and step down to a 1/2" threaded connection in a single fitting. The barbed insert end drives into black poly tubing (secured with a stainless clamp) while the FPT end accepts any 1/2" male-threaded valve, riser, or adapter -- the standard combination for tying an irrigation lateral into a 1/2" sprinkler riser or shutoff.

• 90-degree PVC elbow
• 3/4" barbed insert x 1/2" female pipe thread (FPT)
• Fits ASTM D2104 Schedule 40 polyethylene pipe
• Also fits ASTM D2239 SIDR pressure-rated poly pipe
• Barbed profile grips tubing under pressure -- secure with a stainless hose clamp
• PVC construction -- chemical and corrosion resistant, UV stable when buried

Best For: Sprinkler system laterals dropping to 1/2" spray-head risers, drip-irrigation manifold connections, well-water supply lines routing to a 1/2" valve, and any residential potable-water tie-in where 3/4" poly meets a 1/2" threaded component. Not rated for hot-water or compressed-air applications.