Caps the exposed edge of installed tile and creates a clean, finished transition between a tiled surface and an adjacent flooring material (carpet, wood, vinyl, painted drywall). The L-shaped profile tucks under the last row of tile during setting; the bullnose return covers and protects the raw cut edge of the tile.

• Material: Extruded aluminum with anodized satin bronze finish
• Height: 3/8" (sized for standard floor tile and thicker porcelain up to roughly 10 mm)
• Length: 96" (8 ft; cut to length with a hacksaw and metal file)
• Use: Tile-to-carpet, tile-to-wood, tile-to-vinyl floor transitions; finishing exposed tile edges at countertops, backsplash returns, and shower-curb caps
• Application: Floors and walls; interior commercial and residential installations
• Coordinates with: Beige, tan, and warm-gray grout colors

Installation Tip: Trowel thinset over the substrate and embed the perforated flange of the profile under the tile field before setting the last row of tile. Press the tile firmly down so the bullnose return sits tight against the tile edge, then grout the joint between tile and profile as you would any standard grout line.

Color match Tip: Satin Bronze complements oil-rubbed-bronze plumbing fixtures, antique-brass door hardware, travertine and terra-cotta tile, and warm wood floors (oak, cherry, walnut). It also softens the visual transition where dark grout meets earth-tone tile.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.