Leviton Lever Edge commercial-grade duplex receptacle (model R22-ECBR2-00W) with lever-actuated push-in terminals - flip the lever, insert the stripped wire, snap the lever closed and the terminal is locked. No screw torque to monitor and no risk of nicked-strand failure under the screw head. Color-coded levers (brass, silver, green) make miswiring obvious at the panel, and the back-only termination keeps the device body slim for tight commercial back boxes.

• Rating: 20 Amp, 125 Volt, 2-pole, 3-wire grounding
• NEMA configuration: 5-20R (T-slot parallel-blade, accepts both 5-15P and 5-20P plugs)
• Terminals: Lever-actuated push-in, accepts #12 - #10 AWG solid or stranded copper
• Color-coded levers: brass = hot, silver = neutral, green = ground
• Self-grounding mounting yoke clip - no separate ground pigtail needed in grounded metal boxes
• Body: Impact-resistant polycarbonate face and back box
• Designed for heat and vibration tolerance in commercial environments
• Removable: lift the lever to release, rework, and re-terminate without device replacement
• Color: White (coordinates with Leviton Decora wall plates and devices)
• UL Listed, CSA Certified, NEC compliant

Tip: The 20A NEMA 5-20R T-slot is the right pick for commercial counter outlets, IT and AV equipment feeds, dedicated kitchenette appliance circuits, server room drops, light commercial machinery (small compressors, polishers, vacuum systems), and any 20A branch circuit feeding higher-current loads. The T-slot accepts both standard 5-15P plugs and 20A 5-20P plugs. Install on a 20A breaker; pair with 12 AWG branch wire (minimum) per NEC. The lever-terminal design saves roughly 30-40 seconds per device vs back-wired screw terminals - significant on large commercial pulls (50+ devices), where it also reduces the risk of intermittent loose connections that show up months after install.