Leviton Lever Edge commercial-grade duplex receptacle (model R12-ECBR1-00W) with lever-actuated push-in terminals - flip the lever, insert the stripped wire, snap the lever closed and the terminal is locked. No screw torque to monitor and no risk of nicked-strand failure under the screw head. Color-coded levers (brass, silver, green) make miswiring obvious at the panel, and the back-only termination keeps the device body slim for tight commercial back boxes.

• Rating: 15 Amp, 125 Volt, 2-pole, 3-wire grounding
• NEMA configuration: 5-15R (standard parallel-blade receptacle)
• Terminals: Lever-actuated push-in, accepts #14 - #10 AWG solid or stranded copper
• Color-coded levers: brass = hot, silver = neutral, green = ground
• Self-grounding mounting yoke clip - no separate ground pigtail needed in grounded metal boxes
• Body: Impact-resistant polycarbonate face and back box
• Designed for heat and vibration tolerance in commercial environments
• Removable: lift the lever to release, rework, and re-terminate without device replacement
• Color: White (coordinates with Leviton Decora wall plates and devices)
• UL Listed, CSA Certified, NEC compliant

Tip: The 15A NEMA 5-15R is the standard general-purpose office receptacle - workstation outlets, conference room wall feeds, copier and printer drops, break room feed-through circuits, and any 15A general-lighting branch circuit. Install on a 15A breaker; do not install on a 20A circuit feeding a dedicated 20A load. The lever-terminal design saves roughly 30-40 seconds per device vs back-wired screw terminals - significant on large commercial pulls (50+ devices), where it also reduces the risk of intermittent loose connections that show up months after install. Re-strip wire ends to a clean 5/8" gauge length for proper insertion depth.