This Anderson Metals lead free brass flare elbow connects 3/8" flare tubing to a 1/2" female pipe thread (FPT). Designed for plumbing, fuel, gas, propane, and refrigeration lines where lead-free compliance is required.

• 3/8" SAE 45-degree flare x 1/2" female NPT pipe thread
• Lead free brass - meets Public Law 111-380 and state lead-free regulations
• Operating temperature range: -65 deg F to 250 deg F
• Compatible with copper, brass, aluminum, or steel tubing
• Two-piece construction with nut and body
• Manufacturer part number: 754050-0608

Tip: Cut the tubing square and deburr the inside and outside edge before flaring. A clean, perpendicular cut is the difference between a leak-free seal and a constant drip. Tighten the flare nut wrench-tight - do not use thread sealant on the flare face.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: This product can expose you to lead a chemical known to the State of California to cause cancer and reproductive harm. www.P65Warnings.ca.gov