This Road Power 12-gauge primary wire in white provides reliable 12V low-voltage wiring for automotive, marine, RV, and trailer electrical systems. Built to SAE J1128 GPT spec with full-gauge stranded copper conductors and a flexible PVC insulation jacket - the workhorse single-conductor wire that runs from the fuse panel out to lights, accessories, sensors, and chassis ground returns.

• 12 AWG stranded copper conductor - full-gauge (not CCA copper-clad aluminum)
• Color: White
• Length: 11 Ft
• Current capacity: approximately 25 amps continuous at 12V DC (SAE J1128 GPT general-purpose chassis wiring)
• Operating voltage: 60 VDC / 25 VAC max
• Temperature rating: up to 185 deg F (85 deg C)
• PVC insulation jacket resists abrasion, water, oil, gasoline, and battery acid
• For automotive, boat, truck, RV, trailer, and 12V accessory circuits
• Meets SAE J1128 standards - RoHS compliant

Tip: Use 12-gauge for headlights, horn, fuel pump, electric fans, winches, accessory power feeds, heavier 12V loads. Always fuse the circuit at the battery end - fuse rating should match the wire current capacity, not the load (e.g. 12 AWG runs on a fuse no larger than ~25). For longer cable runs, step up one gauge size to compensate for voltage drop: at 12V, every 1.5% voltage drop matters. White typically marks ABYC marine 12V negative/ground returns; in automotive applications, used for accessory feeds, dome/courtesy lighting, secondary 12V circuits.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: This product contains material that the State of California has determined may cause cancer birth defects or other reproductive harm. www.P65Warnings.ca.gov/product