A solid steel ring with a fully-welded closure - no gap, no open junction. Use it as the junction point where rope, chain, or strap come together: a single anchor ring for multi-strap tie-downs, a harness termination point, a swing-chain or hammock end attachment, or any place you need a fixed loop that won't pull open under load. Zinc plated for corrosion resistance indoors and out.

• Wire gauge: #4 (lower number = thicker wire)
• Inside diameter: 1-1/4"
• Safe Working Load: 270 Lb
• Construction: Solid steel wire formed into a ring with a fully-welded butt joint - no gap, no spring-open under load
• Finish: Zinc plated, weather-resistant for indoor and outdoor use
• Applications: Multi-strap tie-down junctions, harness termination points, leash D-ring substitution, tarp-corner termination, hammock and swing-chain anchor rings, marine and rigging junctions
• Safety: Working Load Limit only - not breaking strength. Never use for overhead lifting of personnel, support of human weight, or athletic and playground equipment (gymnastic rings, swing seats, climbing supports). Inspect the welded seam for hairline cracks or rust pitting before each load-bearing use.

Tip: Workhorse mid-line size - utility tie-downs, harness termination points, junction of two-to-three strap ends, medium-duty pet tie-out junctions, and garden tool hanging loops. Pair with 1/4" rope or 3/16" chain for clean fit through the inside diameter.