This 1/4" zinc-plated quick link provides a fast, tool-free connection for chains, cables, ropes, and rigging hardware. Carbon steel body with a corrosion-resistant zinc finish handles demanding loads in indoor and outdoor applications without rust pickup on contact surfaces.

• Working load limit: 880 lb (straight axial pull)
• Trade size: 1/4" - pairs with 1/4" chain, wire rope, or proof coil
• Overall length: 2-1/4"
• Carbon steel construction with zinc plated finish for rust resistance
• Threaded hex-nut gate - open and close by hand or with a wrench, no link tool required
• Campbell/Apex Tools Series #7350 - MPN T7645126V

Tip: Match the quick link trade size to your chain or rigging - a 1/4" quick link is rated to pair with 1/4" grade-30 proof coil chain. Always tighten the gate nut fully against the link body before loading to seal the threads and prevent gate back-off under cyclic load.

Warning: Not rated for overhead lifting, hoisting, or supporting human weight. Quick links are connector hardware, not lifting hardware - use a rated shackle or master link for overhead applications.