Water-based inverted livestock marking paint that creates bright, easy-to-see, vivid marks on animals. The high visibility colors are made for tail marking (heat detection) and general livestock identification, and the paint is offered in seven fluorescent colors.

• Safe to mark livestock without irritating the animal's skin; Rust-Oleum states that when used as directed as a temporary marker it will cause no lasting harm nor significant irritation to the skin of the animal
• Bright, robust markings even on wet surfaces
• Fade resistant and weather resistant, with markings lasting up to 30 days
• 17 oz fill weight aerosol can, packed 12 cans per carton
• Covers approximately 600-700 linear feet at 1 inch wide
• Dries to the touch in less than 15 minutes at 70-80 deg F and 50 percent relative humidity
• Apply at 40-90 deg F with humidity below 85 percent; can be used down to 25 deg F, which may slightly reduce the delivery rate
• Color: Fluorescent Yellow
• 5 year shelf life

Tip: Remove excess dirt or debris before marking. Shake the can vigorously for one minute after the mixing ball is heard, but do not strike the can. Hold it 4 to 10 inches from the surface and press the spray tip sideways. Overspray can carry a significant distance, so keep the can moving and mind nearby animals and equipment. Clean the valve by spraying upright for 2-3 seconds after each use and wipe the tip when finished.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov