Bundle of 10 two-foot straight lengths of seamless Type L copper water tube - 20 Ft of tube in all. Twenty-four-inch pieces are the handy size for repair runs, valve replacements and stub-outs where cutting into a full coil is more than the job needs, and 10 pieces is JMF's standard bundle quantity for 3/4" tube.

• Nominal size: 3/4" (ASTM B88 water tube is designated by nominal size; the actual outside diameter is 7/8")
• Wall thickness: 0.045"
• Inside diameter: 0.785"
• Weight: 0.455 lb per foot
• Length: 2 Ft per piece; sold as a bundle of 10 pieces (20 Ft total), JMF's standard bundle quantity for 3/4" tube. JMF lists its Type L Handi Length in 1/2" through 1" in 2 Ft, 4 Ft and 6 Ft pieces for the do-it-yourself market
• ASTM B88 Type L; medium wall, thinner than Type K and thicker than Type M
• Rated working pressure: 495 PSIG at 150 deg F and 466 PSIG at 200 deg F, JMF's published rating for tube in the annealed condition. JMF rates hard drawn tube higher but states those figures should only be used with properly designed flare or compression joints, since soldering or brazing can anneal the tube
• C12200 phosphorus-deoxidized copper, 99.9% minimum copper content
• Conforms to NSF/ANSI 61 Annex G, the third-party drinking water certification JMF publishes for its Type K, L and M water tube; evaluated by Underwriters Laboratories for drinking water supplies of pH 6.5 and above
• Joins by sweat solder or compatible push-fit and compression fittings
• Manufacturer part: 6362112679802

Tip: Clean the cut ends with emery cloth and apply flux before sweating so the solder draws a full joint.