Add a substantial, decorative wall hook for coats, robes, towels, bags, and hats with the National Hardware V167 heavy-duty garment hook. A zinc die-cast body and a 35 lb safe working load make it a real garment hook -- not a thin stamped-steel utility hook -- so a wool coat, a heavy bath towel, or a loaded tote bag will not pull it loose over time. The classic ball-tip silhouette suits bedrooms, bathrooms, closets, mudrooms, entryways, and back-of-door coat racks.

• Heavy-duty die-cast zinc construction (not stamped sheet steel)
• 35 lb safe working load -- handles coats, robes, towels, totes, and tool bags
• Classic ball-tip decorative profile
• 4-9/16" overall height x 3-9/16" projection from the wall
• Two pre-drilled mounting holes; mounting screws included
• Finish: Brass
• Model V167 heavy-duty garment hook series

Installation Tip: Mount into a stud whenever possible -- the hook is rated for 35 lb only with anchorage that does not pull out. For drywall locations without a stud, swap the included screws for #8 self-drilling drywall anchors (rated 30 lb+ in 1/2" drywall) to keep the full working load. Pre-drill pilot holes when mounting into hardwood trim to avoid splitting.

Finish Selection Tip: Polished brass pairs with traditional, transitional, and warm-tone decor -- oak trim, brushed brass cabinet pulls, classic bathroom fixtures, and warm-white wall paint. Use this finish where you already have brass towel bars, brass curtain rods, or unlacquered-brass cabinet hardware to keep the metals consistent.

Use Cases: Closet rod-end coat hooks, mudroom coat strips, bathroom robe and towel hooks, bedroom back-of-door hooks, entry hall coat trees, kids' room jacket hooks, laundry-room garment-drying hooks, and back-of-cabinet apron and bag hooks. The 35 lb rating also makes this a workable shop hook for tool bags and aprons.