Rounded PVC trim that finishes and protects the exposed edge of installed tile. The bullnose face gives a soft, decorative curve where tile terminates at wall corners, backsplash returns, tub surrounds, countertop edges, and shower-curb caps. Unlike aluminum trim, PVC will not corrode in wet areas and is safe in shower and tub installations.

• Material: Solid PVC (will not rust, corrode, or stain in wet environments)
• Height: 5/16" (sized for standard wall tile and thinner floor tile up to roughly 8 mm)
• Length: 96" (8 ft; cut to length with a fine-tooth hacksaw or sharp utility knife)
• Profile: Rounded bullnose face with perforated anchoring flange
• Color: White (clean bright white that pairs with white grout, white subway tile, and modern bathroom installations)
• Use: Tile terminations at backsplashes, tub and shower surrounds, countertop returns, and outside-corner finish on walls
• Application: Floors and walls; interior commercial and residential installations including wet areas

Installation Tip: Trowel thinset over the substrate and embed the perforated flange of the profile under the tile field before setting the last row of tile. Press the tile firmly down so the bullnose return sits tight against the tile edge, then grout the joint between tile and profile as you would any standard grout line.

Color match Tip: White PVC pairs cleanly with white subway tile, white grout, gray-and-white penny tile, and modern bathroom installations. It coordinates with chrome and brushed-nickel hardware. For warm-tone tile installations, choose the Beige variant instead.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.