The Century Metal Series 9" reciprocating saw blade features 5% cobalt high-speed steel teeth electron-beam welded to a shock-absorbing alloy backbone. The 8/10 variable-pitch tooth pattern is the standard choice for thicker ferrous and non-ferrous stock - rebar, threaded rod, angle iron, square tubing, schedule 40 conduit, and nail-embedded wood demolition - where each tooth needs to clear a heavier chip.

• 5% cobalt bi-metal teeth deliver up to 20x the life of standard blades in metal
• Shock-absorbing alloy backbone resists snapping under load
• 1" blade width and 0.042" heavy-duty thickness for stable straight cuts
• 8/10 TPI variable pitch reduces vibration and clears chips in 1/8"+ stock
• 1/2" universal shank fits all major reciprocating saws (DeWalt, Milwaukee, Makita, Bosch, Ryobi, Ridgid)
• 9" length is the do-everything middle blade for plumbing, framing demo, and general metal work
• MPN 07990 (Century 07X9X family: third digit = length, last digit = TPI class)

Tip: For metal, run the saw at 50-75% speed with steady pressure and apply cutting wax (or a few drops of cutting oil) every 30 seconds. The wax doubles blade life by carrying chips out of the kerf and keeping the teeth cool.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: This product and the dust created by its use may contain chemicals including lead known to the State of California to cause cancer birth defects or other reproductive harm. For more information go to www.p65warnings.co.gov