Continuous-rim diamond blade engineered for chip-free cuts in ceramic, porcelain, and stone tile. The extended-performance diamond matrix is bonded to a steel core with a rock-solid diamond-reinforced rim, which delivers long blade life and clean edges in both wet and dry cutting. Fits standard 5/8" arbor wet tile saws.

• Blade diameter: 10"
• Continuous rim, no segments
• Diamond-reinforced edge for chip-free cuts
• Kerf (edge thickness): 0.060"
• Arbor: 5/8"
• Cuts ceramic, porcelain, stone, and light masonry
• Wet or dry cutting

Application: The 10" size is built for full-size pro wet tile saws cutting large-format floor tile, porcelain pavers, granite/marble thresholds, and stone steps. Deeper plunge handles thicker stone and large-format porcelain in a single pass.

Tip: Wet cutting almost always extends blade life and produces cleaner edges; keep the water reservoir full and aimed at the cut line. Feed the tile slowly into the spinning blade - let the blade do the work rather than forcing it. Excessive pressure overheats the diamond matrix and shortens blade life. For dense porcelain, slow the feed rate further and listen for the blade to recover speed between cuts.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm.