The Wej-it All-Anchor is a torque-controlled wedge anchor for fastening into solid concrete, grout-filled block, and solid masonry. The full-bodied headed bolt design delivers maximum bolt strength and reliable vibration-resistant holding power, while a stainless steel expansion clip wraps the body and keeps the anchor centered in the hole to prevent in-hole wobble. To install, drill the same diameter hole as the anchor, blow out the dust, insert the anchor through the fixture, and torque the nut down to expand the clip and set the anchor permanently.

• Size: 1/2" diameter x 3-1/2" length
• Full-bodied headed bolt design for maximum tensile strength
• Stainless steel expansion clip wraps the body to prevent in-hole wobble
• Torque-controlled wedge action sets the anchor permanently in place
• Zinc plated carbon steel body and nut for interior and dry exterior service
• For solid concrete, grout-filled concrete block, and solid brick masonry
• Drill the hole the same diameter as the anchor using a carbide-tipped masonry bit
• Hex nut and flat washer included with each anchor
• Sold individually (one anchor with nut and washer)

Tip: Workhorse 1/2" wedge anchor for structural sill plates, ledger boards, hold-down posts, equipment bases, and heavy bracket mounting; minimum embedment about 2-1/4" leaves around 1-1/4" for fixture and nut. Always set the anchor with a torque wrench to the manufacturer specified value -- under-torque leaves the wedge loose, over-torque can deform the fixture.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov