This Anderson Metals Type 304 stainless steel cored pipe plug seals an unused female NPT port on a pipe, valve, manifold, or fitting. The cored (hollow-bored) body keeps the weight and material cost down compared to a solid plug while delivering the same corrosion resistance for food, dairy, brewing, marine, and chemical service.

• 3/4" MIP - external male NPT thread (3/4-14 NPT)
• Square head drive - turn with a standard adjustable wrench or square pipe wrench
• Type 304 stainless steel (ASTM A-351) for broad chemical and corrosion resistance
• Class 150 rating - 300 PSI at 72 deg F, 150 PSI saturated steam at 366 deg F
• NPT thread conforms to ASME B1.20.1 for cross-brand fitting compatibility
• Use with air, water, oil, natural gas, low-pressure steam, and most non-chlorinated chemicals
• Anderson Metals MPN 62654B (Anderson splits the cored-plug line by stock-size class: 62670=1/8", 62671=1/4", 62672=3/8" - then 62653=1/2", 62654=3/4", 62655=1")
• 0.13 lb net weight

Tip: Wrap 2-3 wraps of PTFE tape on the male thread (or apply a stainless-compatible pipe dope) and tighten hand-tight plus 1 to 2 turns with a wrench. Stainless threads can gall under excessive torque - stop as soon as the joint seals. For food-contact or sanitary service, use a USP or NSF-listed thread sealant. Avoid pairing with chlorinated environments (pool/spa lines, coastal salt-spray) where 316 stainless is the better choice.

FOR CALIFORNIA SHOPPERS

Hello Californians! Your government wants us to show you the following message:

• ⚠  Warning: This Product Can Expose You To Chromium Which Is Know To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. Www.P65Warnings.Ca.Gov