National Hardware heavy-duty strap hinge in zinc-plated steel for barn doors, shed doors, storage bin lids, gates, and other utility-door hinge work. Offset screw-hole pattern spreads the fastener load and reduces wood splitting at the mount. Tight non-removable pin lets the hinge mount in either a left- or right-hand orientation.

• Length: 6" (closed)
• Material: hot-rolled steel with zinc plating for corrosion resistance
• Series: National Hardware 282 Series (heavy-duty)
• Safe working load: 85 lbs
• Pin: tight, non-removable - mounts left- or right-hand
• Holes: offset countersunk for wood screws (screws not included)

Use case. Medium shed door, garage side door, walk-through garden gate, equipment locker door.

Tip: space hinges along the door height in proportion to door weight - a typical shed door takes two hinges in the upper third and one at the bottom; tall gates and barn doors take three or four spaced evenly. Drive #10 or #12 wood screws long enough to bite into solid framing behind the door skin, not just the skin itself, or the hinge will sag over time.