FLAME GUARD PAINT ADDITIVE

Flame Guard is a granular additive designed to give paint a Class "B" fire retardant rating. Just double the dose and it becomes a Class A fire retardant additive.

Flame Guard can only be added to a flat latex coating. Otherwise, it will gel the coating. Your paint is fully tint-able with Flame Guard.

Testing data employed for measuring the flame spread rate was: ASTM D 3806-79 that corresponds with ASTM E-84. It assumes Class "A" specification when used as directed.

Flame Guard does not foam. It suffocates the substrate from the flame - therefore, if there is no oxygen for the flame, there is no fire. Flame Guard should be used on interior surfaces wherever you wish to "slow" the spread of the flame.

Use Flame Guard treated paint in schools, hospitals, nursing homes, private dwellings, and day care facilities, or wherever you wish to have added protection in your home such as children's rooms or kitchen.

• A  granular  paint additive designed to give paint a Class "B" fire retardant rating ~ Double the dose for Class "A"
• NOTE:  Can only be used with flat latex coating/paint
• Paint is still fully tint-able with Flame Guard
• Flame Guard should be used on interior surfaces wherever you wish to "slow" the spread of the flame.
• Use Flame Guard treated paint in schools, hospitals, nursing homes, private dwellings, and day care facilities, or wherever you wish to have added protection.
• Lasts 3 to 5 years
• This 6 ounce pouch  is one dose to treat one gallon of flat latex paint to result in a Class B rating.  For Class A rating, use two pouches per one gallon of flat latex paint.