Concrete and Masonry Natural Look Waterproofer Protective Sealer ~ Gallon

Description:

Item # TVE0I5UPC: 080047241093
VALSPAR® NATURAL LOOK WATERPROOFER PROTECTIVE SEALER

Natural Look Waterproofer forms a long-lasting, waterproofing seal on concrete, brick, masonry, natural stone and pavers. The penetrating formula protects against the sun's powerful rays, damaging weather, water, gasoline and de-icing salts  

Use on interior and exterior aggregate, concrete, masonry, mortar and flagstone. Do not use below grade


  • Clear, waterproofing sealer for brick, pavers, driveways, sidewalks and patios
  • Protects from sun, water and household chemical damage
  • Resists gasoline, oil and de-icing salts
  • Maintains the beauty of concrete without changing its appearance
  • Ready to use
  • Covers approximately 75–150 sq. ft.  per gallon, depending upon surface porosity
  • Test surface porosity before sealing: Avoid using this product on nonporous, sealed surfaces. To test, place a few drops of water on the surface. If water sinks in, the surface is porous enough to use this finish. If water remains on the surface, do not use without prep.   Previously sealed surfaces: Clean with an all-purpose cleaner (TSP or substitute). Previously sealed surfaces must be porous and able to accept additional sealer.

    D.O.T. REGULATED:   Ships via  GROUND  transport  only    [ No Overnight, 2nd Day or 3rd Day Select delivery options, sorry. ]   Also no shipping via USPS or to USPS Buildings or PO Boxes.    = =   Cannot be shipped to Alaska or Hawaii or any island not accessible by road.   = =